最新法规和条例

CU TR 031/2012 on safety of agricultural and forestry tractors and their trailers

发布日期:2017-09-24 18:43  浏览次数:295
Technical Regulation CU TR 031/2012 on agricultural and forestry tractors and trailers thereto: main definitionsEurasian Economic Union
Technical Regulation CU TR 031/2012 on agricultural and forestry tractors and trailers thereto adopted in the framework of the Customs Union between Russia, Belarus and Kazakhstan by the Decree No. 60 of July 20, 2012 of the Commission of the Customs Union came into force on February 15, 2015.

Scope and relevant products

CU TR 031/2012 establishes requirements for:

manufactured or imported wheel tractors and crawlers destined for agriculture and forestry, as well as their trailers. Only tractors with the maximum speed not less than 6 km/hour are subject to conformity assessment according to CU TR 031/2012
manufactured or imported components for tractors and their trailers which have an impact on their safety, such as
lighting and light-signal devices (back lights, lights of reverse motion, brake signals, turn indicators, far-reaching headlight, dimmers, antifog lights, back antifog lights, parking lights, fixtures for illumination of back license plate)
light reflecting devices
back mirrors
audio signalling devices
glasses
seatbelts
speed limiting devices
speedometers
mechanical tractive-coupling devices
tires
engines
seats
cabins
A detailed list of components subject to CU TR 031/2012 is indicated in Annex No. 1 of this regulation.

The requirements of CU TR 031/2012 shall not apply to:

single tractors and trailers produced individually, being a result of a creative process
tractors with trailers which were manufactured and put into circulation until February 15, 2015 (the date of coming into force of the regulation)
tractors and trailers being in operation or subject to repair
Market LaunchCertificate CU TR 031 2012

Prior to launching tractors and their components onto the Customs Union market (currently Eurasian Economic Union market), the manufacturer / representative should:

comply with the basic health and safety requirements mentioned in the Technical Regulation CU TR 031/2012
apply procedures for conformity assessment
obtain conformity documents: certificate of conformity or register the type of vehicle or chassis, as well as make sure that the latter is included in products
make sure that products bear the EAC mark
In practice, any products coming onto the Customs Union markets (sales outlets and commissioning sites) after customs clearance should include originals / certified copies of certificates of conformity.
上一篇: 下一篇: